Tooling / Heat treatment / Dew Point Analyzer
Super Systems Inc.

Dew Point Analyzer

Available in: Finland, Estonia, Latvia, Lithuania

A dew point analyzer measures the amount of moisture present in a gas to determine the theoretical temperature at which the moisture in the gas will condense (the saturation point).

Although dew point is related to the temperature and the pressure of the gas, the dew point of a gas remains the same regardless of the actual temperature of the gas. For example, a gas at room temperature 21.1°C with a dew point of 4.4°C will cause condensation if it is cooled to a temperature below 4.4°C. This can be seen in the summer when the ambient temperature in the evenings drops below the dew point temperature of the air, causing water droplets to form on any surface that cools to a point below the dew point temperature

Knowing the dew point of a gas in a heat treating environment can be beneficial in either determining the carbon potential of the gas, or determining the purity level of the incoming process gases.

High Range Dew Point Products

  • DP2000Measured Gases: Moisture Dew Point in Hydrocarbon Fuels
    Easy-to-use portable dew point analyzer used for endothermic generators and atmosphere furnaces.  Quick and easy reference for control setpoint and % Carbon reference with temperature.  Used for CQI-9 daily endothermic generator and furnace atmosphere checks.
  • DPC2530Measures/Controls/Alarms: Moisture Dew Point in Hydrocarbon Fuels
    Continuous dew point system used for endothermic and exothermic generators, furnace atmospheres and plant air systems.  Continuous monitoring with control and alarm outputs.
  • Simple DewContinuous dew point analyzer
    Used for various applications where monitoring a dew point above 0 F enables automatic controls, continuous monitoring or alarming.

Low Range Dew Point Products

  • DPL 4000 – Portable Low Range Dew Point system used for accurate and reliable verification of gases using the latest in sensor technology
    Commonly used for the verification of Hydrogen, Nitrogen or Argon dew point.  Quick disconnect setup for use on multiple gas feed lines.  Rapid response sensor used for quick readings.
  • DPC3500 – Continuous low range dew point analyzer
    Digital read out with communications or dew point retransmission for data acquisition.  Commonly used for the verification of hydrogen, nitrogen or argon gasses.

Copyright: Super Systems Inc